qos queue-profile <1-6>
Configure a queue profile
Syntax
-
no qos queue-profile
<1-6>
-
qos queue-profile
<1-6> apply
-
qos queue-profile
<1-6> member add {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
-
qos queue-profile
<1-6> member remove {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
-
qos queue-profile
<1-6> name WORD<0-64>
Command Parameters
- apply
- Applies queue profile
settings.
- member add {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
- Adds a port member.
-
Identifies the
slot and port in one of the following formats:
-
a single slot and port (slot/port)
-
a range of slots and ports (slot/port-slot/port)
-
a series of slots and ports
(slot/port,slot/port,slot/port)
-
all ports on the same slot (slot/all)
-
all ports on the switch (all)
If the platform supports channelization and the port is
channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- member remove {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
- Removes a port member.
-
Identifies the
slot and port in one of the following formats:
-
a single slot and port (slot/port)
-
a range of slots and ports (slot/port-slot/port)
-
a series of slots and ports
(slot/port,slot/port,slot/port)
-
all ports on the same slot (slot/all)
-
all ports on the switch (all)
If the platform supports channelization and the port is
channelized, you must also specify the sub-port in the format
slot/port/sub-port.
- name WORD<0-64>
- Changes the queue profile
name.
Command Mode
Global Configuration
